產品目錄
產品中心
防爆管接頭ZBGG供應 防爆管接頭 生產BHJ系列防爆變徑接頭
防爆管接頭ZBGG供應 防爆管接頭 生產BHJ系列防爆變徑接頭 適用范圍： | ||
1、1區、2區危險場所 | ||
防爆管接頭ZBGG供應 防爆管接頭 生產BHJ系列防爆變徑接頭產品特點： | ||
1、防爆標志：ExdⅡ。 | ||
| 型號意義： | ||
 | ||
■ ﹒爆炸性氣體環境危險場所：1﹑2區 ﹒爆炸性氣體環境：ⅡA﹑ⅡB ﹒溫度組別：T4及以下 ﹒*可根據用戶做成粉塵防爆 □Applying scope ﹒Hazardous location:1﹠2 ﹒Explosive gas mixture: ⅡA﹑ⅡB ﹒Temperature classes:Less than T4 ﹒*Can be made dust explosion-proof according to user s requiment ﹒防爆標志:ExdIIBT4 ﹒防護等級:IP55 ﹒防腐等級:WF2 ﹒使用類別:AC-3、AC-4 ﹒額定電壓:220V/380V(如有特殊要求請注明) ﹒額定電流:10A (如有特殊要求請注明) ﹒進線口螺紋:G3/4(如有特殊要求請注明) □ Main Technical Parameters ﹒Ex-marK:ExdeIIBT6 ﹒Protection grade:IP55 Corrosion-proof grade:WF1 ﹒Using sort:AC-3、AC-4 ﹒Rated voltage:220V/380V(Please note when special request) ﹒Rated current:10A(Please note when special request) ﹒Ingress thread specification:G3/4(Please note when special request) ■安裝、使用與維修 ﹒安裝前應檢查本產品銘牌上所列基本數據是否與實際使用條件相符 ﹒產品應可靠接地 ﹒無論何種接線須將引入裝置密封圈壓。 ﹒維修時必須切斷前級電源后開蓋 ﹒引入裝置密封圈和橡膠墊均采用耐油橡膠3001制造，用戶在使用、 維修過程中若發現老化應與制造廠定購，并及時更換以確保防 爆性能 ﹒海拔不超過2000m ﹒周圍環境溫度為-20～+400C ﹒周圍空氣相對濕度不大于95% ﹒在無顯著搖動和沖出振動的地方 □Installation usage, maintenance. ﹒Check the data before install it. ﹒Product should be link to ground. ﹒Cable should pressurized in to airproof quoit. ﹒cut off power before maintenance. ﹒In-build System and the rubber circle are made of oil-proof 3001, you should contact our factory if the airproof quoit is damaged. ﹒The altitude is not over2000m ﹒The environment temperature is-20～+400C ﹒The relative humidity of the air around the equipment is not over95% ﹒No distinct shaking,concussion and libration
■安裝、使用與維修 ﹒安裝前應檢查本產品銘牌上所列基本數據是否與實際使用條件相符 ﹒產品應可靠接地 ﹒無論何種接線須將引入裝置密封圈壓。 ﹒維修時必須切斷前級電源后開蓋 ﹒引入裝置密封圈和橡膠墊均采用耐油橡膠3001制造，用戶在使用、 維修過程中若發現老化應與制造廠定購，并及時更換以確保防 爆性能 ﹒海拔不超過2000m ﹒周圍環境溫度為-20～+400C ﹒周圍空氣相對濕度不大于95% ﹒在無顯著搖動和沖出振動的地方 □Installation usage, maintenance. ﹒Check the data before install it. ﹒Product should be link to ground. ﹒Cable should pressurized in to airproof quoit. ﹒cut off power before maintenance. ﹒In-build System and the rubber circle are made of oil-proof 3001, you should contact our factory if the airproof quoit is damaged. ﹒The altitude is not over2000m ﹒The environment temperature is-20～+400C ﹒The relative humidity of the air around the equipment is not over95% ﹒No distinct shaking,concussion and libration |
